Description

Original XL4015 5A DC-DC 4-38V to 1.25-36V 24V 12V 9V 5V Step Down Adjustable Power Supply Module for LED Strips With Heat Sink

• 100% New and High Quality 5A (5,000mA) 4-38V DC-DC Adjustable Step Down Module
• Original XL4015 IC Power Supply Suitable for LED Strips, LED Matrix and Other Circuits
• Wide Input Voltage 4V DC to 38V DC, Adjustable Output Voltage 1.25V DC to 36V DC
• Module Size: 54mm x 24mm x 15mm  (l x w x h) Weight: 30 grams only with heat sink

Module nature: Non-isolated buck module (BUCK)

Input voltage: 4-38V (input please try not to exceed 38V)

Output voltage: 1.25-36V continuously adjustable

Output current: 0-5A (5000mA)

Output power: 75W

Operating temperature: -40 ~ +85 degrees

Operating frequency: 180KHz

Conversion efficiency: up to 96%

Load regulation: S (I) ≤ 0.8% (input 24V, output 12V, load from 1 ~ 4.5A change measured)

Voltage regulation: S (u) ≤ 0.8% (output 12V, 4A, the voltage from 18 ~ 32V measured when)

Power indicator: Yes

Short-circuit protection: Yes (limit current 8A)

Over-temperature protection: Yes (automatic shutdown after over-temperature output)

Input reverse polarity protection: None, (if necessary, input high current diode in series)

Installation: 2 x 3mm screws

Wiring: Soldering, V-IN as the input, V-OUT as the output

Note:

1.When the module output voltage can not be adjusted, the output  voltage is always equal to the input voltage.Please adjust the potentiometer counterclockwise 20 laps or more. (Let potentiometer against your chest, counterclockwise turn boost) .

2. Input voltage must be higher than the output voltage of 1.5v or more

3. high current or high power needed to enhance heat dissipation, you may use a fan.